Step 1
SCREWING THE BATTENS
- Fix battens at 400mm centers on a flat surface using expansion screws. Battens should be the opposite way to the intentions of the cladding. Battens on butt joints should be a minimum of 120mm wide.
- Fix Starter Clips to the battens at least 16mm from the edges. Ensure the cladding will be level before fixing.
Step 2
SCREWING THE BATTENS
3. Clip the first board in place into the Starter Clips. Clip and screw ConcealedClips into the initial board along the joists. Ensure each board is level, Screws in place.
Product Display
WPC Wall Panel - WPC Wall Board
First generation exterior WPC wall cladding
